Configure Logging¶
Configure structured logging with multiple output formats and integrate with log aggregation systems.
Configuration Options¶
SMG supports flexible logging configuration via CLI flags or environment variables. The gateway writes its logs to stdout, and also to files when --log-dir is set. Timestamps are in UTC.
CLI Flags¶
| Flag | Default | Description |
|---|---|---|
--log-level |
info |
Log level for SMG's own crates: debug, info, warn, error |
--log-json |
false |
Output logs as JSON |
--log-dir |
None | Directory for daily log files (enables file logging); created at start-up when missing — an existing path must be a writable directory (see File Logging) |
--log-mm-timing |
false |
Log per-request multimodal timing at INFO (see Multimodal Timing Logs) |
Environment Variable¶
Without RUST_LOG, SMG builds its log filter from --log-level: SMG's own crates log at that level and every dependency (hyper, tonic, and so on) at warn. Setting RUST_LOG replaces that filter entirely, and --log-level is then ignored; a RUST_LOG value that fails to parse is itself ignored, and --log-level applies. A target that matches no RUST_LOG directive is not logged at all, so start the value with a base level:
# Everything at debug, dependencies included
RUST_LOG=debug smg launch --worker-urls http://worker:8000
# Dependencies at warn, SMG at info, routing policies at debug
RUST_LOG=warn,smg=info,smg::policies=debug smg launch --worker-urls http://worker:8000A directive matches every target that starts with it, so smg covers the gateway's smg::... targets and crates such as smg_mesh and smg_rl. Other SMG crates, such as tool_parser, reasoning_parser, llm_tokenizer, and llm_multimodal, log under their own names and follow the base level unless you name them.
Log Levels¶
| Level | Description | Use Case |
|---|---|---|
error |
Error conditions only | Production (minimal) |
warn |
Warnings and errors | Production (recommended) |
info |
Informational messages, including a line for each request and response | Production (verbose) |
debug |
Debug information, including routing decisions | Development, troubleshooting |
trace is not accepted by --log-level; set it through RUST_LOG. With OpenTelemetry tracing enabled, the trace layer keeps its own filter, so the request spans are exported to the OTLP collector at every log level, warn and error included. The log output is still gated by the log filter: the request spans are INFO-level, so at warn and error the log lines carry no span fields such as request_id.
Set Log Level¶
# Via flag
smg launch --worker-urls http://worker:8000 --log-level debug
# Via environment
RUST_LOG=info smg launch --worker-urls http://worker:8000Output Formats¶
Plain Text (Default)¶
Human-readable lines: UTC timestamp, level, the enclosing request span with its fields, target, source location, and message. On stdout the lines carry ANSI color codes when stdout is a terminal, not when it is redirected into a file or a pipe (NO_COLOR set to a non-empty value turns color off on a terminal too; FORCE_COLOR or CLICOLOR_FORCE set to a non-empty value other than 0 turns it on into a pipe); files written with --log-dir never do.
2026-09-24 10:30:45 INFO http_request{method=POST path=/v1/chat/completions version=HTTP/1.1 module="smg" request_id="chatcmpl-4qD9pXvR2mT7sLk0aZ3nB8wE" status_code=200 latency=1523}: smg::response: model_gateway/src/middleware/logging.rs:465: finished processing requestJSON Format¶
Machine-readable format for log aggregation, one JSON object per line:
smg launch --worker-urls http://worker:8000 --log-jsonOutput (pretty-printed here):
{
"timestamp": "2026-09-24 10:30:45",
"level": "INFO",
"message": "finished processing request",
"target": "smg::response",
"filename": "model_gateway/src/middleware/logging.rs",
"line_number": 465,
"span": {
"latency": 1523,
"method": "POST",
"module": "smg",
"path": "/v1/chat/completions",
"request_id": "chatcmpl-4qD9pXvR2mT7sLk0aZ3nB8wE",
"status_code": 200,
"version": "HTTP/1.1",
"name": "http_request"
},
"spans": [
{
"latency": 1523,
"method": "POST",
"module": "smg",
"path": "/v1/chat/completions",
"request_id": "chatcmpl-4qD9pXvR2mT7sLk0aZ3nB8wE",
"status_code": 200,
"version": "HTTP/1.1",
"name": "http_request"
}
]
}The event's own fields (message and any structured fields) sit at the top level. Fields of the enclosing spans are under span (the innermost span) and spans (all of them, outermost first), so the request ID is at span.request_id. latency is in microseconds.
Request and Response Logs¶
Every request to the main listener — unknown paths included — is logged inside an http_request span that carries method, path, version, request_id and, when tracing is on, trace_id, plus status_code and latency (microseconds) once the response is ready. That is the whole access record: no headers, no bodies, no prompts, and the path without its query string (a credential a client puts in a query parameter does not reach the log). --access-log-fields adds named optional fields to the record (client_addr, forwarded_for, user_agent, tenant, key_id, request_bytes, response_bytes, worker); see the Configuration Reference. With response_bytes selected, a streamed response's byte count is known only at its end, so a third INFO line, finished streaming the response, carries it; a stream cut short carries the bytes sent so far as response_bytes_sent on its close or failure line.
| Target | Level | Message | When |
|---|---|---|---|
smg::request |
INFO | started processing request |
A request arrives |
smg::response |
INFO | finished processing request |
Any response below 400 |
smg::response |
WARN | request failed with client error |
A 4xx response |
smg::response |
ERROR | request failed with server error |
A 5xx response |
smg::response |
ERROR | response stream failed after the head was sent |
The response body failed after streaming began |
smg::response |
INFO | client closed the connection before the response |
The client disconnected before the gateway answered; logged with status_code 499 |
smg::response |
INFO | client closed the connection before the response stream ended |
The client disconnected while the response body was still streaming |
smg::response |
DEBUG | request refused; reported by the refusing router |
A refusal the routing layer already logged with its own WARN line |
The logging layer writes one ERROR line per 5xx response. A request to an unknown path gets a JSON-envelope 404 (a known path with the wrong method, a 405) and is logged like any other request.
A client that disconnects first — an SDK timeout, a user who navigated away, a proxy cutting an idle stream — is a normal outcome, not a gateway failure, so its one line is INFO. A disconnect before the response takes the place of the response line and records status_code 499 and the latency so far; a disconnect mid-stream follows the response line already written when the response head went out. The same lines cover the rare request the server itself dropped unanswered, such as on a handler panic or a connection cut by a forced shutdown. All of these count in smg_http_responses_total as a 499 with error_code="client_closed_request"; see the Metrics Reference.
A refusal the gateway answers on its own — for example a 503 no_available_workers or a 404 model_not_found — is logged by the routing layer as one WARN line with the request ID, the model, and the state of its worker pools, rate-limited while the condition lasts. The response line for such a refusal drops to DEBUG, so a client retrying against a model whose workers are all down does not fill the log with extra error lines per attempt.
Health Probe Logs¶
Requests to /health, /readiness, and /liveness log both lines at DEBUG, whatever the status; the response line reads finished probe request. A 503 from /readiness while workers are still loading is an expected state, so polling probes do not fill the log with ERROR lines. Probes served on the dedicated --health-check-port listener bypass the logging layer entirely.
Other Structured Logs¶
| Target | Level | Message | When |
|---|---|---|---|
smg::policies::* |
DEBUG | Routing decisions | See Routing Decision Logs |
smg::audit |
INFO | control_plane_audit |
Control-plane requests, when control-plane authentication is configured. The Rust binary logs them by default (turn off with --disable-audit-logging); the pip smg launch logs them only with --control-plane-audit-enabled |
smg_rl |
INFO | rl.proxy, rl.fanout |
RL control plane calls, with --enable-rl |
Routing Decision Logs¶
At DEBUG, the routing policies log one structured line per selection decision, naming the branch taken and the worker chosen, so you can see why a request landed on a given worker. The lines are off at the default info level. Turn them on for the policy targets only:
RUST_LOG=warn,smg=info,smg::policies=debug smg launch --worker-urls http://worker:8000 --policy cache_aware| Message | Target | Fields |
|---|---|---|
Cache-aware selection |
smg::policies::cache_aware |
index (tree or hash), branch, worker, model_id; tree decisions add matched_ratio, threshold, matched_units, input_units, and credited_units; hash decisions add level |
Sticky routing decision |
smg::policies::registry |
source (rid or header), key, branch, worker, model_id |
Prefix-hash selection |
smg::policies::prefix_hash |
branch, level, worker, model_id |
Branch values:
- Cache-aware, tree index:
tree_match,spill,expected_wait_fallback,first_healthy_fallback, the same values assmg_cache_aware_policy_branch_total. - Cache-aware, hash index:
hash_hit,hash_spill,short_request(shorter than the smallest--cache-boundariesvalue),expected_wait_fallback,kv_pressure_expected_wait. - Cache-aware under KV-cache imbalance:
kv_pressure_expected_wait; this line has noindexfield. - Sticky sessions (
--routing-key-override):occupied_hit,occupied_miss,vacant,cap_respill,no_healthy_workers.keyis the internal map key, which combines the model, the PD leg, and the routing key. - Prefix hash:
ring_hit,load_balance_walk,fallback_least_load,no_routing_key,no_healthy_workers.
When cache-aware routing uses KV events, each decision logs Event-driven routing with branch (event_hit, event_spill, or event_miss), overlap_blocks, request_blocks, policy, worker, and model_id. A request diverted to warm up a thin worker instead logs Cache miss routed to a warming worker (branch warmup_slice) or Cache hit diverted to a thin worker (branch warmup_divert).
See the Metrics Reference for the matching decision counters.
Multimodal Timing Logs¶
--log-mm-timing logs per-request multimodal timing at INFO. Each line's message starts with smg_mm_timing, followed by the stage:
| Message | Contents |
|---|---|
smg_mm_timing process_multimodal_plan |
Media counts (image_count, audio_count, video_count, video_frame_count), per-phase times (media_fetch_decode_ms, config_lookup_ms, preprocess_ms, token_expand_ms, total_ms), and token counts before and after placeholder expansion (original_tokens, expanded_tokens) |
smg_mm_timing mm_tensor_payload_inline, smg_mm_timing mm_shm_write |
Tensor transport: inline sends and shared-memory writes |
smg_mm_timing assemble_tokenspeed, smg_mm_timing assemble_tokenspeed_item, smg_mm_timing tokenspeed_shm_write_direct |
TokenSpeed request assembly |
smg_mm_timing video_decode_backend, smg_mm_timing video_tempfile_write |
Video decoding (target llm_multimodal::media) |
smg launch --worker-urls grpc://worker:50051 --model-path Qwen/Qwen2.5-VL-7B-Instruct --log-mm-timingThe older SMG_LOG_MM_TIMING environment variable (1, true, yes, or on) still turns the logs on when the flag is absent, but it is deprecated: SMG logs a warning, and support ends in the next minor release.
The timing lines do not record where each request's media is processed; the smg_mm_processing_total metric counts that, labeled with the model, the processing location (router or worker), and the reason. See the Metrics Reference for the reason values and Multimodal for the processing pipeline.
File Logging¶
Enable persistent log files with automatic daily rotation.
Enable File Logging¶
smg launch \
--worker-urls http://worker:8000 \
--log-dir /var/log/smg \
--log-level infoFeatures¶
- Same content as stdout: plain text or JSON (with
--log-json), without ANSI colors - Daily rotation: a new file starts at midnight UTC
- File naming:
smg.YYYY-MM-DD, with no extension - No deletion: old files are kept; see Log Rotation
- Non-blocking I/O: dedicated writer threads write the files and stdout; a writer that falls more than 128,000 lines behind drops new lines for its sink rather than slowing requests
- Dropped-line reporting: drops are counted per sink in the
smg_log_dropped_linesmetric; while drops continue, SMG logs a WARN line every 30 seconds (log lines dropped: the writer queue was full, with the total and the count since the last report); see the Metrics Reference - Directory creation: SMG creates the directory if it does not exist
Log Directory Requirements¶
An existing --log-dir must be a directory SMG can write. A missing one is created at start-up, so it must sit under a directory SMG can write; a relative path resolves against the working directory.
Any other path — an existing file, a directory SMG cannot write, a path under a file or under an unwritable directory — is refused at startup with a configuration error naming log_dir, the path, and the reason, before the gateway binds its port.
Example Directory Structure¶
/var/log/smg/
├── smg.2026-09-22
├── smg.2026-09-23
└── smg.2026-09-24Docker Logging¶
Basic Configuration¶
services:
smg:
image: lightseekorg/smg:latest
command: >
--worker-urls http://worker:8000
--log-json
logging:
driver: json-file
options:
max-size: "100m"
max-file: "3"Production Configuration¶
services:
smg:
image: lightseekorg/smg:latest
command: >
--worker-urls http://worker:8000
--log-level info
--log-json
--log-dir /var/log/smg
volumes:
- smg-logs:/var/log/smg
logging:
driver: json-file
options:
max-size: "50m"
max-file: "5"
volumes:
smg-logs:The image runs as the non-root user smg (UID 65532), so --log-dir must be writable by that user. /var/log/smg does not exist in the image, so Docker creates the new named volume owned by root; change its owner to UID 65532 before the first start, or SMG refuses to start with a configuration error naming log_dir as not writable (see Log Directory Requirements).
Kubernetes Logging¶
Basic Pod Logging¶
# Follow logs
kubectl logs -n inference -l app=smg -f
# Previous container logs
kubectl logs -n inference -l app=smg --previous
# All containers in pod
kubectl logs -n inference <pod-name> --all-containersDeployment Configuration¶
apiVersion: apps/v1
kind: Deployment
metadata:
name: smg
spec:
template:
spec:
containers:
- name: smg
args:
- --worker-urls=http://worker:8000
- --log-level=info
- --log-jsonTo turn on debug output for one area only, set RUST_LOG on the container (for example warn,smg=info,smg::policies=debug); it replaces the --log-level filter.
Log Aggregation¶
Grafana Loki¶
server:
http_listen_port: 9080
clients:
- url: http://loki:3100/loki/api/v1/push
scrape_configs:
- job_name: smg
kubernetes_sd_configs:
- role: pod
relabel_configs:
- source_labels: [__meta_kubernetes_pod_label_app]
regex: smg
action: keep
- source_labels: [__meta_kubernetes_pod_label_app]
target_label: app
- source_labels: [__meta_kubernetes_namespace]
target_label: namespace
- source_labels: [__meta_kubernetes_pod_name]
target_label: pod
pipeline_stages:
- json:
expressions:
level: level
target: target
request_id: span.request_id
- labels:
level:
target:Elasticsearch + Fluentd¶
<source>
@type tail
path /var/log/containers/smg*.log
pos_file /var/log/fluentd-smg.pos
tag smg.*
<parse>
@type json
</parse>
</source>
<filter smg.**>
@type parser
key_name log
<parse>
@type json
time_key timestamp
time_format %Y-%m-%d %H:%M:%S
utc true
</parse>
</filter>
<match smg.**>
@type elasticsearch
host elasticsearch
port 9200
index_name smg-logs
include_timestamp true
</match>SMG's timestamp has second precision and no time-zone suffix; it is always UTC. The filter above parses it as the event time, and include_timestamp stores that time as @timestamp.
Log Queries¶
Loki/LogQL¶
LogQL's json parser flattens nested fields with _, so the request ID is span_request_id.
# All SMG logs
{app="smg"}
# Error logs only
{app="smg"} | json | level="ERROR"
# Specific request
{app="smg"} | json | span_request_id="chatcmpl-4qD9pXvR2mT7sLk0aZ3nB8wE"
# Server errors returned to clients
{app="smg"} | json | target="smg::response" | level="ERROR"
# Cache-aware decisions that spilled away from the prefix holder (needs smg::policies=debug)
{app="smg"} | json | message="Cache-aware selection" | branch="spill"
# Multimodal timing (needs --log-mm-timing)
{app="smg"} |= "smg_mm_timing"Elasticsearch/Kibana¶
{
"query": {
"bool": {
"must": [
{ "match": { "target": "smg::response" } },
{ "match": { "level": "ERROR" } }
],
"filter": [
{ "range": { "@timestamp": { "gte": "now-1h" } } }
]
}
}
}OpenTelemetry Integration¶
When OpenTelemetry is enabled, the gateway's request events are logged at a higher level:
| OTEL Enabled | Event Level | Behavior |
|---|---|---|
| Yes | INFO | Exported to OTLP collector |
| No | DEBUG | Not exported (local only) |
These are the HTTP routers' Sending request, Sending concurrent requests, and Received concurrent requests events, which are attached to the request's trace. Other log lines are not sent to the collector; only the request spans and these events are exported. See OpenTelemetry Tracing.
# Enable OTEL with logging
smg launch \
--worker-urls http://worker:8000 \
--enable-trace \
--otlp-traces-endpoint localhost:4317 \
--log-level infoRequest Correlation¶
Request ID Propagation¶
Every request to the main listener gets an ID. SMG takes it from the first of these request headers that is present: x-request-id, x-correlation-id, x-trace-id, request-id (replace the list with --request-id-headers), honoring the value only when it is 1 to 128 visible ASCII characters. Otherwise it generates one with an OpenAI-style prefix (chatcmpl-, cmpl-, gnt-, resp-, msg_, or req-) followed by 24 random letters and digits, and rewrites the request header so a worker reading or forwarding it sees the chosen ID as its only value. The ID is returned in the x-request-id response header and recorded as request_id on the request's http_request span, so it appears on the lines logged while the request is handled, as long as SMG logs at info or more verbose.
# Send request with custom ID
curl -H "X-Request-ID: my-trace-123" \
-H "Content-Type: application/json" \
http://localhost:30000/v1/chat/completions \
-d '{"model": "llama", "messages": [{"role": "user", "content": "Hi"}]}'Backend (engine) request ids derive from the same id, so gateway and worker
logs correlate: gRPC requests are dispatched as {request-id}-{uuid} (the
suffix keeps retries and tool-loop iterations unique), and the response body
id matches. A protocol-level rid field (chat, completions, messages,
generate, embeddings, classify) overrides this and is used verbatim outside
PD mode.
Trace a Request¶
# Find all logs for a request
kubectl logs -n inference -l app=smg | grep "my-trace-123"
# In Loki
{app="smg"} | json | span_request_id="my-trace-123"Log Rotation¶
File Retention¶
SMG starts a new file at midnight UTC but never deletes old ones. Prune them on a schedule, for example from cron:
# Delete SMG log files older than 7 days
find /var/log/smg -name 'smg.*' -mtime +7 -deleteDocker¶
logging:
driver: json-file
options:
max-size: "100m"
max-file: "5"Verification¶
# Check log output
smg launch --worker-urls http://worker:8000 --log-level debug | head -20
# Verify JSON format (the startup banner before the logs is plain text, so skip non-JSON lines)
smg launch --worker-urls http://worker:8000 --log-json | jq -R 'fromjson?'
# Test log level filtering: no INFO lines should appear (stop with Ctrl-C)
smg launch --worker-urls http://worker:8000 --log-level warn | grep INFO
# Check file logging
smg launch --worker-urls http://worker:8000 --log-dir /tmp/smg-logs &
ls -la /tmp/smg-logs/Troubleshooting¶
No logs appearing
- Check log level is not too restrictive:
smg launch --log-level debug ...- The gateway logs to stdout, not stderr (the Python launchers may print their own messages to stderr):
smg launch --worker-urls http://worker:8000 | head- Check RUST_LOG isn't overriding:
unset RUST_LOG
smg launch --log-level info ...- An unusable
--log-dirdoes not silently disable logging: SMG refuses to start with a configuration error naminglog_dir, so a gateway that is running still logs to stdout; see Log Directory Requirements.
Logs not in JSON format
- Ensure
--log-jsonflag is set:
smg launch --log-json --worker-urls http://worker:8000- Lines printed before logging is set up are plain text: the startup banner goes to stdout ahead of the JSON logs, and startup errors, such as a refused
--log-dir, go to stderr
File logs not appearing
- Check directory exists and is writable:
mkdir -p /var/log/smg
chmod 755 /var/log/smgVerify
--log-dirflag is set correctlyFiles are named
smg.YYYY-MM-DDwith no.logextension, so a*.logglob does not match them
Log aggregator not receiving logs
- Verify JSON format is enabled
- Check network connectivity to aggregator
- Verify log format matches parser expectations: span fields such as
request_idare nested underspan, andtimestampuses%Y-%m-%d %H:%M:%Sin UTC
What's Next?¶
- Monitoring — Metrics, tracing, and alerting
- Configuration Reference — Full CLI options